Speedip V2+
VS.
Other Approaches
Approach 3:
Building and operating a continuous water quality sampling system
Speedip V2+:
· Lower initial investment
· Higher flexibility
· Fully automated waypoint
sampling*
When Speedip V2+ is paired with DJI M350/M300 UAVs, it supports fully automated waypoint missions through the DJI Pilot app. For use with other UAVs, developers can integrate via Speedip V2+'s API.
Approach 2:
Operators traveling by boat or other vehicles to the target location for manual sampling
Speedip V2+:
· Remote sampling for better safety & comfort
· Higher efficiency, lower costs
· A typical sampling task:
< 8 min, 80% time reduction*
27.46 USD, 88% cost savings*
On January 17, 2025, at an authoritative institute of oceanology in Asia, a Speedip V2+ mounted on a DJI M300 UAV was used to collect coastal seawater samples. During this mission, there was a northwest wind at force 2 (an average wind speed of 2.8 ± 0.2 m/s) and an average flight altitude of 15 meters. The stated operation time was measured from the moment the UAV was armed to when the mission ended with the UAV’s landing. Taking the scenario described above as an example, boat-based sampling required about 2,400 seconds (40 minutes) per operation, while Speedip V2+ sampling took 479 seconds – an approximately 80% reduction in time.
Taking the real user scenario described above as an example, the corresponding costs are detailed in the table below:
On January 17, 2025, at an authoritative institute of oceanology in Asia, a Speedip V2+ mounted on a DJI M300 UAV was used to collect coastal seawater samples. During this mission, there was a northwest wind at force 2 (an average wind speed of 2.8 ± 0.2 m/s) and an average flight altitude of 15 meters. The stated operation time was measured from the moment the UAV was armed to when the mission ended with the UAV’s landing.
Taking the scenario described above as an example, boat-based sampling required about 2,400 seconds (40 minutes) per operation, while Speedip V2+ sampling took 479 seconds - an approximately 80% reduction in time.
Approach 4:
Unmanned boat sampling
Speedip V2+:
· Rapid deployment and return without heavy
transport
· Safer & smoother operation with cable monitoring
system and emergency rope-cut function*
Once the emergency rope-cut function is activated, the unit must be returned to Soarability for rope replacement to ensure optimal performance in future operations.
Apply to become a dealer
More Efficient
Speedip V2+ improves water sampling efficiency and reduces costs in complex aquatic environments. It supports fully automated waypoint sampling* for repetitive tasks.
When Speedip V2+ is paired with DJI M350/M300 UAVs, it supports fully automated waypoint missions through the DJI Pilot app. For use with other UAVs, developers can integrate via Speedip V2+'s API.
＜ 8 min*
For a typical 1 km mission
On January 17, 2025, at an authoritative institute of oceanology in Asia, a Speedip V2+ mounted on a DJI M300 UAV was used to collect coastal seawater samples. During this mission, there was a northwest wind at force 2 (an average wind speed of 2.8 ± 0.2 m/s) and an average flight altitude of 15 meters. The stated operation time was measured from the moment the UAV was armed to when the mission ended with the UAV’s landing.
Taking the scenario described above as an example, boat-based sampling required about 2,400 seconds (40 minutes) per operation, while Speedip V2+ sampling took 479 seconds – an approximately 80% reduction in time.
80%*
Time reduction
On January 17, 2025, at an authoritative institute of oceanology in Asia, a Speedip V2+ mounted on a DJI M300 UAV was used to collect coastal seawater samples. During this mission, there was a northwest wind at force 2 (an average wind speed of 2.8 ± 0.2 m/s) and an average flight altitude of 15 meters. The stated operation time was measured from the moment the UAV was armed to when the mission ended with the UAV’s landing.
Taking the scenario described above as an example, boat-based sampling required about 2,400 seconds (40 minutes) per operation, while Speedip V2+ sampling took 479 seconds – an approximately 80% reduction in time.
78%*
Cost savings
100+
Daily sampling capacity
On January 17, 2025, at an authoritative institute of oceanology in Asia, a Speedip V2+ mounted on a DJI M300 UAV was used to collect coastal seawater samples. During this mission, there was a northwest wind at force 2 (an average wind speed of 2.8 ± 0.2 m/s) and an average flight altitude of 15 meters. The stated operation time was measured from the moment the UAV was armed to when the mission ended with the UAV’s landing. Taking the scenario described above as an example, boat-based sampling required about 2,400 seconds (40 minutes) per operation, while Speedip V2+ sampling took 479 seconds – an approximately 80% reduction in time.
Taking the real user scenario described above as an example, the corresponding costs are detailed in the table below:
Safer
Speedip V2+ enables remote UAV-based sampling, keeping operators away from water areas to ensure safety.
It is highly compatible with UAVs and equipped with an emergency rope-cut function* to minimize losses in case of container obstruction.
Accurate
Speedip V2+ employs intelligent control logic to ensure accurate sampling at the intended depth.
The container features enhanced corrosion resistance and ultra-low VOC adhesives to maintain sample integrity.
Durable
Speedip V2+ features intelligent rope monitoring, Health Management System (HMS), and PCBAs resisting moisture, dust, and corrosion. Its reliability has been verified by 24-hour high-intensity vibration* and 24-hour salt spray testing, combined with stringent quality testing, to ensure exceptional durability.
The vibration test includes a 20-hour simulated operational vibration test and a 4-hour vibration test in its transport case.
Once the emergency rope-cut function is activated, the unit must be returned to Soarability for rope replacement to ensure optimal performance in future operations.
Learn More About Speedip V2+
Internal PCBAs resisting moisture, dust, and corrosion*
improve Speedip V2 +'s adaptability and lifespan.
需搭配防水套，可实现全面三防。
A Built-in starlight-level downward-facing camera,
approximately 180° diagonal field of view, provides real-time operational environment monitoring for BVLOS safety.
The ultra-lightweight design enables the main unit to weigh only 570g, primarily made from aerospace-grade aluminum alloy.
A real-time rope monitoring system detects rope tangling and grounding to minimize damage and losses.
570g
180° ultra-wide-angle night-vision camera
For full protection against moisture, dust, and corrosion, please use with the designated waterproof cover.
(Health Management System) HMS delivers abnormal status alerts and winch maintenance notifications to reduce downtime due to wear or failures.
API Available
Speedip V2+ is highly compatible with DJI PSDK.
For other UAVs, users can send commands and receive operational data through Speedip's USB-C.
Apply to become a dealer
360° Experience
Four Simple Steps for Efficient Sampling
1. Installation
Mount the device on the UAV → Connect & secure the cable → Confirm Speedip V2+'s proper communication with the UAV
Fewer Terrain Constraints
Greater Application Possibilities
Quality Control
Pursuing Excellence with Stringent Quality Control
Raw Material Control
Material dimensions, cleanliness, and sealing are strictly controlled to ensure high-quality raw materials for reliable production.
Scaled Production
Annual output rose from 220+ units in 2024 to 500+* in 2025, backed by complete SOPs and a well-trained, dedicated, and stable production team.
inlcuding Speedip V2+ and other Speedip series products
Final Testing
Before delivery, each device undergoes aging and functional tests, with strict control in a simulated environment to ensure reliability and durability.
Photographed at Speedip's dedicated testing facility. After testing, each container is thoroughly cleaned, dried, and packed.
FAQs
-
What applications is Speedip V2+ designed for?Speedip V2+ is primarily designed for routine water sampling, forensic evidence collection, aquatic research, and emergency water monitoring. If your use case falls outside these areas, please feel free to contact Soarability* to explore whether Speedip V2+ is a good fit for your needs. *Email: inquiry@soarability.com Whats App
-
What is the maximum sampling depth? Can deeper sampling depths be customized?Speedip V2+ is equipped with a winch that can release up to 10 meters of rope. The actual maximum sampling depth depends on the UAV’s hovering height. Examples: · Hovering 1 m above the water surface → Maximum sampling depth: 9 m · Hovering 5 m above the water surface → Maximum sampling depth: 5 m Due to the limited space in the winch system, SpeedipV2+ cannot accommodate additional rope, and customized sampling depths are not supported. Speedip V3 will offer a significantly extended maximum rope length. Please stay tuned!
-
What is the maximum sampling capacity of a single task? Can larger containers be customized?The standard packing list includes a 1.1 L PMMA container, with 1.5 L PMMA and 1 L Stainless Steel containers for options. Customizing a larger container is not recommended, as it requires careful evaluation of the UAV's payload capacity, mounting space, Speedip's lifting capability, and potential interference with its millimeter-wave radar.
-
Does Speedip V2+ test water quality besides sample collection?No.
-
Does Speedip V2+ monitor water flow velocity besides sample collection?No.
-
Does Speedip V2+ support multi-point sampling in a single task? Why is it not adopted for suction-based sampling?Multi-point sampling in a single task is not supported. We did not offer suction-based design due to the risk of sample mixing and cross-contamination when using a shared tube in multiple sampling tasks.
-
Can target sampling points be set via web platform?No. The "Speed Cloud" web platform is no longer available for Speedip V2+.
-
Does the container require cleaning when sampling from different locations?Yes. Cleaning is recommended to avoid cross-contamination between samples.
-
Can users repair or replace the rope themselves after the emergency rope-cut function is activated?No, once the emergency rope-cut function is triggered, the unit must be returned to Soarability for rope replacement to ensure optimal performance and safety in future operations. Unauthorized disassembly will void the warranty.
-
What is the recommended interval for factory maintenance of Speedip V2+?Factory maintenance is recommended after 2,000 meters of cumulative winch operation, as indicated by the Health Management System (HMS).
-
Can Speedip V2+ be integrated with a UAV dock for scheduled automatic water sampling?It is theoretically feasible. Although Soarability does not offer a delicate dock solution, we can assist in connecting you with the dock solution providers if needed.
-
Can Speedip V2+ be integrated with UAVs other than DJI M350/M300？Yes. Speedip V2+ supports secondary development via its USB-C APl interface, enabling communication with other UAVs to transmit real-time sampling status and receive control commands. For detailed APl documentation, please contact Soarability. When integrating Speedip V2+ with other UAVs, please ensure: · A minimum mounting space of 25 x 18 x 35 cm · A payload capacity of at least 2.2 kg (when using the 1.1 L container) The following UAVs are not compatible with Speedip V2+: DJI Inspire, Mavic, Phantom, and Matrice M30/M4 series. Mounting Speedip V2+ on VTOL UAVs is not recommended.
-
Can the UAV still carry an H30T camera or Sniffer4D after mounting Speedip V2+?Speedip V2+ comes with a built-in downward-facing camera, and an additional gimbal camera is generally not needed. When using the 1.1 L container, DJl M350/M300 can still carry an H30T camera or a Sniffer4D by utilizing the dual gimbal mount and adjusting the Speedip mounting bracket to maintain balance. Please ensure: · The total payload does not exceed the UAV's payload capacity. · The center of gravity is properly adjusted for light safety.
-
How to achieve a fully autonomous sampling task using DJI M350/M300 and the Waypoint function?After Speedip V2+ is successfully connected to the UAV, tap as follows on the DJl Pilot app from the remote controller: "Flight Route" → "Create a Route" → "Waypoint Route" → "Set Waypoints" → Select "Auto" for Speedip V2+ → Set the "Relative Altitude" of Waypoint 1 → Set the "Relative Altitude" of Waypoint 2 → "Hover" for 10s → "ONdown" → "Hover" for 10s × 3 (30s in total) → "Calibrate String Length" → "Hover" for 10s × 3 (30s in total) Save → Upload → Start flight mission The hovering time should be adjusted according to the actual sampling depth. For step-by-step instructions, please refer to the tutorial video.
-
Is the UAV included in the 5,250 USD price of Speedip V2+?No. The UAV is not included. Please contact the local DJI dealer for the UAV purchase. Please note that the service fees for payment, insurance, tariffs, VAT/GST and any other extra fees that may occur will be under the buyer's responsibility and are NOT included in the price.
-
Does Speedip V2+ support logo customization?Yes. Please contact Soarability for customization details and cost.
-
Are trial services available before purchasing Speedip V2+?We provide rental services. Please contact Soarability for more details.
-
What payment methods are supported? Is installment payment acceptable?We only accept 100% prepayment through international bank transfer and online payment. Please note that transaction fees for both methods are borne by the buyer. Installment payment is not supported.
-
Will there be an invoice issued for purchasing Speedip V2+?We will issue a Proforma Invoice for payment and a Commercial Invoice for shipment.
-
Is a contract required for purchasing Speedip V2+?A contract is not needed so that the purchase procedure can be simplified.
-
When will Speedip V2+ be delivered after purchase, and what delivery services are used?The units can be dispatched within 1 working day after payment is confirmed received. International shipping usually takes another 1-2 weeks, depending on the destination. We arrange the shipment through major carriers, including DHL, FedEx, and UPS. Please contact Soarability for confirmation of freight and country of origin*. * Country of Origin: Singapore/China
-
What is the warranty policy for Speedip V2+? Is a warranty extension available?The standard warranty is one year, with an extra month added to the standard warranty considering the international delivery period. The warranty extension should be purchased along with the unit, with an additional 20% of the total price/per year and a maximum of a 2-year extension period.
-
Is insureance available for Speedip V2+ or for the whole UAV system?Insurance is not provided by Soarability and not included in the price.
-
Is on-site training available for first-time UAV-based water sampling?Speedip V2+ is very user-friendly, and you can refer to the Speedip V2+ Quick Start Guide* for standard operation guidelines. The on-site support can be provided at an additional cost if necessary. Please contact Soarability for more details. Our remote support is included in the price and you can always reach us directly if any issues arise.
Contact Us to Enhance Your Efficiency through Speedip V2+
